Builders cleaning services offer an intensive deep-clean process designed to remove dust and construction debris from surfaces, performed by professional cleaners using specialised equipment.

There are two stages to CFMFacilities builders cleaning Melbourne: (1) labourers clean (which involves quick site clean-up such as collecting rubbish, vacuuming, and tidying); and (2) final clean which requires pre-silicone cleaning of wet areas and kitchen.

Debris Elimination

Construction and renovation work leaves behind a great deal of waste material that can be difficult to clear away without professional assistance from cleaning crews. This debris may include piles of timber and drywall scrap, nails and screws, cigarette butts, caulking grouting material and other forms of waste that must be addressed before work can resume.

A builder clean is a comprehensive cleaning service designed to tackle everything left behind from residential, commercial or industrial projects. This involves vacuuming and dusting surfaces before wiping down surfaces to remove splatters of paint before wiping down all areas neatly before the defects period begins.

Quality builders cleaning services employ industry equipment to ensure every area is spotless and will also include a final clean on the day before handover for client peace of mind that their new building is in pristine condition.

Floors

Construction and renovation sites often cause havoc to floors by way of nails, screws, waste materials and chemicals that damage their surfaces. Builders cleaning services offer comprehensive floor care services designed to restore floors so they’re suitable for installing carpets or tiles; additionally, they can clean surfaces like stairways and ramps as needed.

Once upon a time, builders would conduct their own builders clean. This involved taking care to remove protective coverings, vacuum the joinery and wipe down bench tops themselves. However, modern clients demand premium presentations, which is why specialist CFMFacilities builders cleaning Melbourne are well-suited to meet this expectation.

Post-construction cleaning consists of three stages: rough, light, and final. Each requires specific equipment and supplies that may depend on the size and scope of the job. A large project may take longer due to increased supplies necessary and will incur more cleaning expenses overall.

Carpets

Construction work creates dust and dirt that settles deep within carpets and other flooring materials, necessitating professional cleaning services to remove it and return surfaces to their former glory. Look for companies using safe cleaning fluids that won’t void your warranty; customer reviews can also give an excellent indication of how a company treats their clients.

Years ago, builders cleaning was seen as an after-construction service to remove protective coverings and vacuum the joinery before wiping down bench tops and cleaning floors. Today however, clients are much more knowledgeable of this process and expect a thorough presentation clean of their property including kitchens, laundries, bedrooms, bathrooms, and all internal areas.

Windows

Clean windows are essential components of any building. They allow light into rooms, and make its interior appear pristine and professional. Nowadays, most cleaning services offer window washing services with specialised equipment to make sure the job gets done efficiently and professionally.

Most cleaning companies specialise in commercial and residential window washing services, offering them to walls, roofs, and other surfaces as well. Their experts can remove clogs, paint spills, and scrape off plastic materials that have adhered to surfaces such as windows as well as clean window frames and sills thoroughly to remove plastic material and stickers that have accrued on them.

CFMFacilities builders cleaning Melbourne specialises in deep-cleaning all types of buildings, using various access methods for reaching high windows such as rope access, telescopic water fed poles, suspended scaffolding platforms, swing stages or man lifts to gain entry and reach all surfaces of a structure.

Painting

Painting services are offered by many builders cleaning companies, who can prepare surfaces for painting by cleaning and prepping surfaces for prep, wiping down cupboards and shelving, cleaning windows and more. As paint dust can remain airborne for several hours or days after construction or refurbishment projects have completed, prompt cleanup of this dust is crucial in reducing risk and spreading it elsewhere.

Builders cleaning services also offer labourers cleans to maintain a tidy site during construction. These are conducted periodically to keep it tidy and safe for clients; once defects have been addressed a final cleaner can then take place prior to handover of the site.

If asbestos is not disturbed, it can pose little risk. However, renovations and repairs can aggravate it; if this is not done correctly, it can cause dangerous diseases.

Hiring a licensed asbestos removal professional to minimise health risks and comply with work health safety regulations is essential. Using an unlicensed professional can result in fines. For an emergency asbestos removal Adelaide, click here.

Identifying Asbestos

Identifying asbestos is a crucial step to keeping yourself safe from exposure. Often, homeowners find asbestos in their homes as walls, floors, ceiling tiles, insulation, and items like water tanks. Knowing how to recognise this material will allow you to find it and call a licensed asbestos abatement professional.

It is impossible to tell if a product contains asbestos just by looking at it. Only laboratory testing of a sample can confirm the presence of asbestos. A competent person, such as a professional occupational hygienist or an accredited asbestos laboratory, should collect these samples.

It is recommended that a visual inspection is conducted before any work is done in the area. Those working in the affected area should wear disposable coveralls, gloves, goggles and respirators. These should be kept until the site has been inspected and declared safe by an independent asbestos air monitor. This will usually take about ten minutes.

Damaged Asbestos

Although undamaged asbestos material poses little risk, checking regularly for damage and limiting access to affected areas is essential. If you plan any work or maintenance that may disturb the asbestos, have an industrial hygiene firm inspect it. They can check air quality, restrict access, and contain the area more effectively than you can. For an emergency asbestos removal Adelaide, click here.

All workers must use personal protective equipment. This includes a respirator or dust mask with two straps to hold it securely around the face, disposable overalls, gloves and safety glasses or goggles. Workers must also dampen any debris with a spray pump pack. This reduces dust as it floats and makes it easier to remove.

Do not dust, sweep or vacuum any debris that may contain asbestos. Dry sweeping stirs up and releases asbestos fibres into the air. Do not saw, sand, scrape or drill asbestos. If the damaged material is extensive, or if you are uncertain, have it removed by trained asbestos removal contractors.

Repairing Asbestos

Removing asbestos-containing material is a significant job requiring trained and licensed professionals. It is a hazardous and expensive process. It involves cleaning up, sealing off areas to prevent contamination and putting on protective clothing, including respirators. Renovation and construction work commence only when the site has been inspected and declared safe by an independent air monitor.

EHOs and removalists have reported seeing friable asbestos in schools, prisons, warehouses, and other Government buildings. The most common cause of this was the weathering of asbestos products. The salt and ocean breezes corrode the materials, causing them to become friable.

Before removing any asbestos materials, wet the surface of the products by spraying them with water using a hand-held spray bottle. This is to help the fibres stay damp and not float in the air, making removing them more accessible. Before leaving the work area, re-wet any debris on your clothes and tools while still standing on the entrance/exit “transition area” plastic. Then, put on new coveralls and gloves, and double bag the used disposable coveralls and gloves in unique asbestos waste disposal bags. For an emergency asbestos removal Adelaide, click here.

Removal of Asbestos

The best and safest way to remove asbestos is to hire a professional. It’s essential to check the professional’s credentials and experience. They should also have appropriate licences and insurance. They should also have a clean track record and provide references from previous clients. It’s also essential to ensure that professionals are adequately trained and have the proper equipment to work in contaminated areas.

They should wear air-supplied respirators (friable) with a fit test, disposable coveralls with fitted hoods, rubber gloves, gumboots, and eye protection. The materials should be wetted before removal and double-bagged in 6-millimeter plastic bags. The waste should be enclosed in a leak-proof container and sealed.

The removal area should be sealed off from the rest of the home to prevent dust contaminating other rooms. Keeping family members and pets away from the site is essential until the work is finished. You should also ensure that the work area is well-ventilated and that any power tools are used in a controlled environment.

The switchboard is the heart of your home’s electrical system. If it is outdated or damaged, you should consider a switchboard upgrades Adelaide.

An upgraded switchboard can help prevent fires and meet the stringent Australian electrical safety standards mandated by your energy provider. The following signs indicate it is time to call a professional for switchboard upgrades in Adelaide.

Safety Switches

Safety switches are installed on switchboards or built into power points to cut off the electrical supply if there is an electricity overload. This helps prevent electric shocks and electrical fires. They are required in all new homes and should be checked regularly by a qualified electrician. They are also needed in older homes that are changing their electrical cabling. Our expert Adelaide electricians can inspect your switchboard to see if it has the correct level of safety protection and recommend any upgrades.

If your safety switch is constantly tripping, it may indicate a fault with one of your appliances or wiring and should be examined by a professional. You can try unplugging devices individually to identify which appliance is causing the problem. Once the cause is placed, it can be repaired, and the safety switch can be reset.

If you’re thinking about adding some modern electrical appliances to your home, it’s essential that the switchboard can cope with the increased power needs. Older fuse boxes cannot handle the load and can cause dangerous short circuits, leading to property damage, injury or even fires. Newer switchboards incorporate RCDs and Circuit Breakers to isolate the faulty circuit within milliseconds. These features help to reduce the risk of electric shock and fire hazards and are essential for all homes and businesses.

Residual Current Devices (RCDs)

If you have an older switchboard, it may not be able to cope with the modern power demands. This can lead to blown fuses, which are dangerous and a sign that it is time for an upgrade.

A safer alternative to fuses is RCDs, which automatically cut off the electricity supply when there is a fault. These devices are far more sensitive than fuses and circuit breakers, and they can protect against electric shocks and electrical fires.

RCDs are available in various ratings, including low, medium and high. Low RCDs are designed for industrial applications and trip at up to 500 mA residual currents. In comparison, medium RCDs can handle up to 100 mA residual currents and are typically found in commercial buildings such as offices. High-sensitivity RCDs can be used in residential applications and are rated to trip at residual currents between 10 mA and 30 mA.

If your switchboard is fitted with RCDs, testing them regularly is essential. Portable RCDs should be tested at least every three months, while non-portable RCDs should be checked quarterly. RCDs can be tested by switching off all switches and appliances and pressing the test button. If the switchboard trips, this is a sign that there is a fault, and the RCD should be replaced.

Circuit Breakers

An old switchboard may not have enough capacity to handle the power consumption of modern appliances and electrical systems. This can cause problems such as frequent circuit breaker tripping or burning smells. If you notice these issues, it’s time to call a licensed electrician and consider getting a switchboard upgrades Adelaide.

A new switchboard can include modern safety switches unavailable in older models. It can also improve the overall electrical capacity of your home or commercial building, allowing you to install more appliances and electronics. In addition, a new switchboard can add more protection against power surges and overloading.

The switchboard is the central hub that controls electricity distribution throughout your home or business. It’s essential that the switchboard is well-maintained to ensure your electrical safety. A damaged or outdated switchboard can result in electrical faults that can cause electrical fires and injuries to your family and workers.

In addition, older switchboards are prone to short-circuiting, which increases the risk of electric shocks and house fires. Some signs that your switchboard is overdue for an upgrade include flickering lights, a tripping circuit breaker, or a burning smell. If you notice these symptoms, contact a qualified Adelaide electrician immediately.

Fuses

Your switchboard is the central hub for the electrical wiring in your home or business, operating everything from power points to ducted air conditioning. If your switchboard is old and not coping with its demand, it can cause electrical issues such as fires or short circuits.

It is essential to upgrade your switchboard to a safer model to avoid these problems. If you notice that your power points have changed in colour or are hot to touch, this is a sign that your switchboard is unsafe and needs an upgrade ASAP. Flickering lights are another sign that your switchboard is dangerous, and you need an electrician to look at it as soon as possible.

Older switchboards often use ceramic rewireable fuses rather than circuit breakers, which is a severe safety risk and a sign that your switchboard needs an upgrade as soon as possible. This fuse in your switchboard can lead to fires, short circuits and electric shocks.

Our team of licensed electricians can provide a comprehensive electrical safety inspection and quote for your switchboard upgrade. The cost of the upgrade depends on many factors, including whether you have an apartment or house, how many circuits your switchboard has and if it needs to have service meters or fuses disconnected. Contact us today for more information on our range of switchboard upgrades.